Photo Mechanic > Support

Cache Prefences XPPro

(1/1)

MikeFizer:
I'm looking for advice on setting up my preferences for cache on a Dual XP Pro machine with 4gb of RAM. I currently have my disk cache set to a 2 drive 30gb RAID 0 scratch disk I use for PSCS2. I don't normally run these programs concurrently. I'm wondering about the "disk cache size", "reserve at least" and the "memory cache size", any suggestions on settings with this system?

Best,

Mike

Kirk Baker:

--- Quote from: MikeFizer on May 17, 2006, 01:48:26 PM ---I'm looking for advice on setting up my preferences for cache on a Dual XP Pro machine with 4gb of RAM. I currently have my disk cache set to a 2 drive 30gb RAID 0 scratch disk I use for PSCS2. I don't normally run these programs concurrently. I'm wondering about the "disk cache size", "reserve at least" and the "memory cache size", any suggestions on settings with this system?
--- End quote ---

I'd give it 512 MB or a bit higher for the Memory cache.
Disk Cache size I recommend to be no higher than 1024 MB.
"Reserve at least" refers to how much space the caching system will guarantee to be free when it is building its cache.  This keeps it from ever filling up the entire hard drive when building its cache.  Think of it this way: if you have a 30 GB disk with only 1GB free and you tell PM to use 2GB then it will eventually fill up your entire drive.  If you tell it to keep 100MB reserved, then the max PM will use is 924MB and will never fill up your drive.  Of course it won't ever be able to build a 2GB cache unless you free up a gig or two...

HTH,

-Kirk

MikeFizer:
Thank you Kirk, I've set my "memory cache" to 1024, what do you think?

Kirk Baker:

--- Quote from: MikeFizer on May 17, 2006, 02:42:32 PM ---Thank you Kirk, I've set my "memory cache" to 1024, what do you think?
--- End quote ---

I've never had it that large, but you do have 4GB of RAM and 1024MB is only 1/4 of it so that should be fine.

-Kirk

Navigation

[0] Message Index