Author Topic: Fail to burn cd's and dvd's  (Read 5924 times)

Offline Luiz Muzzi

  • Hero Member
  • *****
  • Posts: 701
    • View Profile
    • Luiz Muzzi Photography
Fail to burn cd's and dvd's
« on: September 10, 2009, 09:01:34 AM »
Kirk,
I'm having some trouble with PM.
First, it's taking too long to open a relatively small contact sheet (say 400 photos).
Second, when I try to burn a cd or dvd, it crashes, and there comes an error message. The cd/dvd does not work anymore (can't be erased, etc).
I don'k know what is happening, the only different thing I've done recently was to create an Iphoto library to sync with an Iphone.
Do you think that could be the origin of the problem (perhaps a conflict)?
 I'm running PM 4.6.1 with a MacBook (10.5 Leopard)
Thanks in advance,
Rds,
Luiz Muzzi

Offline Kirk Baker

  • Senior Software Engineer
  • Camera Bits Staff
  • Superhero Member
  • *****
  • Posts: 21444
    • View Profile
    • Camera Bits, Inc.
Re: Fail to burn cd's and dvd's
« Reply #1 on: September 10, 2009, 09:11:21 AM »
Luiz,

I'm having some trouble with PM.
First, it's taking too long to open a relatively small contact sheet (say 400 photos).
Second, when I try to burn a cd or dvd, it crashes, and there comes an error message. The cd/dvd does not work anymore (can't be erased, etc).
I don'k know what is happening, the only different thing I've done recently was to create an Iphoto library to sync with an Iphone.
Do you think that could be the origin of the problem (perhaps a conflict)?
 I'm running PM 4.6.1 with a MacBook (10.5 Leopard)

I'd like to see the crash report.  Did you file it with the PM Crash Reporter?

Otherwise if you want troubleshooting help, please call our technical support folks at (503) 547-2888

They'll be able to help you much faster than I can via the forums.

-Kirk

Offline Luiz Muzzi

  • Hero Member
  • *****
  • Posts: 701
    • View Profile
    • Luiz Muzzi Photography
Re: Fail to burn cd's and dvd's
« Reply #2 on: September 10, 2009, 11:12:04 AM »
Sorry, Kirk.
I think I didn't make myself clear.
The system didn't crash, the burning operation failed repeatedly (with an error message). And PM is also taking a long time to open contact sheets.
The driver is working properly (with Finder/Disk Utility).
As to calling your support personnel by phone, it's kind of difficult because I'm in Brazil (imagine the cost and the trouble).
Thanks for your quick answer.
Luiz Muzzi

Offline Kirk Baker

  • Senior Software Engineer
  • Camera Bits Staff
  • Superhero Member
  • *****
  • Posts: 21444
    • View Profile
    • Camera Bits, Inc.
Re: Fail to burn cd's and dvd's
« Reply #3 on: September 10, 2009, 11:18:33 AM »
Luiz,

The system didn't crash, the burning operation failed repeatedly (with an error message). And PM is also taking a long time to open contact sheets.
The driver is working properly (with Finder/Disk Utility).
As to calling your support personnel by phone, it's kind of difficult because I'm in Brazil (imagine the cost and the trouble).

OK, I'll try to help you here then.

What kind of files are you browsing?
How much time is 'a long time'?
What kind of sorting are you using in the Contact Sheet?
Are there any messages in the console.log or system.log?  (You can view those logs with the Console application (Applications/Utilities/Console))

What is the error message that you're getting?

-Kirk

Offline Luiz Muzzi

  • Hero Member
  • *****
  • Posts: 701
    • View Profile
    • Luiz Muzzi Photography
Re: Fail to burn cd's and dvd's
« Reply #4 on: September 10, 2009, 06:51:02 PM »
Kirk,
The files are CR2+JPG.
400 photos is taking about 12,8 secs.
I`m using capture time sorting in the contact sheet.
See disc recording log below:
Photo Mechanic: Requested burn speed was 47x, actual burn speed is 4x.
Photo Mechanic: Burn failed, Tue Sep  8 08:31:08 2009
Photo Mechanic: Burn sense: 5/21/02 Illegal Request, Invalid address for write
Photo Mechanic: Burn error: 0x80020022 The device failed to respond properly, unable to recover or retry.
Photo Mechanic: Burn started, Tue Sep  8 08:32:13 2009
Photo Mechanic: Burn failed, Tue Sep  8 08:32:23 2009

Photo Mechanic: Burn error: 0x80020021 The device is being used by another application.
Photo Mechanic: Burn started, Tue Sep  8 21:28:03 2009
Photo Mechanic: Burning to CD-RW media with SAO strategy in MATSHITA DVD-R   UJ867A KK07 via ATAPI.
Photo Mechanic: Requested burn speed was 10x, actual burn speed is 10x.
Photo Mechanic: Burn underrun protection is supported, and enabled.
Photo Mechanic: Burn finished, Tue Sep  8 21:36:30 2009
Photo Mechanic: Verify started, Tue Sep  8 21:36:30 2009
Photo Mechanic: Verify finished, Tue Sep  8 21:41:01 2009
Photo Mechanic: Burn started, Tue Sep  8 21:45:06 2009
Photo Mechanic: Erase started, Tue Sep  8 21:45:06 2009
Photo Mechanic: Erasing CD-RW media in MATSHITA DVD-R   UJ867A KK07 via ATAPI.
Photo Mechanic: Erase finished, Tue Sep  8 21:45:36 2009
Photo Mechanic: Burning to CD-RW media with SAO strategy in MATSHITA DVD-R   UJ867A KK07 via ATAPI.
Photo Mechanic: Requested burn speed was 10x, actual burn speed is 10x.
Photo Mechanic: Burn underrun protection is supported, and enabled.
Photo Mechanic: Burn failed, Tue Sep  8 21:50:04 2009
Photo Mechanic: Burn sense: 5/21/02 Illegal Request, Invalid address for write
Photo Mechanic: Burn error: 0x80020022 The device failed to respond properly, unable to recover or retry.
Photo Mechanic: Burn started, Tue Sep  8 21:50:59 2009
Photo Mechanic: Burn failed, Tue Sep  8 21:51:09 2009
Photo Mechanic: Burn error: 0x80020021 The device is being used by another application.
Photo Mechanic: Burn started, Tue Sep  8 21:51:52 2009
Photo Mechanic: Burn failed, Tue Sep  8 21:52:02 2009
Photo Mechanic: Burn error: 0x80020021 The device is being used by another application.
Photo Mechanic: Burn started, Tue Sep  8 22:02:53 2009
Photo Mechanic: Burn failed, Tue Sep  8 22:03:03 2009
Photo Mechanic: Burn error: 0x80020021 The device is being used by another application.
Photo Mechanic: Burn started, Tue Sep  8 22:20:57 2009
Photo Mechanic: Burning to DVD+R DL (RITEK D01) media with DAO strategy in MATSHITA DVD-R   UJ867A KK07 via ATAPI.
Photo Mechanic: Requested burn speed was 2x, actual burn speed is 2.4x.
Photo Mechanic: Burn finished, Tue Sep  8 22:57:07 2009
Photo Mechanic: Verify started, Tue Sep  8 22:57:07 2009
Photo Mechanic: Verify failed, Tue Sep  8 23:14:30 2009
Photo Mechanic: Verify sense: 3/11/00 Medium Error, Unrecovered read error
Photo Mechanic: Verify error: 0x80020063 Verification of the burn failed.
Photo Mechanic: Burn started, Wed Sep  9 07:33:17 2009
Photo Mechanic: Burn failed, Wed Sep  9 07:33:27 2009
Photo Mechanic: Burn error: 0x80020021 The device is being used by another application.
Photo Mechanic: Burn started, Wed Sep  9 07:33:56 2009
Photo Mechanic: Burn failed, Wed Sep  9 07:34:06 2009
Photo Mechanic: Burn error: 0x80020021 The device is being used by another application.
Photo Mechanic: Burn started, Wed Sep  9 21:44:48 2009
Photo Mechanic: Burning to CD-RW media with SAO strategy in MATSHITA DVD-R   UJ867A KK07 via ATAPI.
Photo Mechanic: Requested burn speed was 10x, actual burn speed is 10x.
Photo Mechanic: Burn underrun protection is supported, and enabled.
Photo Mechanic: Burn failed, Wed Sep  9 21:46:09 2009
Photo Mechanic: Burn sense: 4/09/03 Hardware Error, Spindle servo failure
Photo Mechanic: Burn error: 0x80020022 The device failed to respond properly, unable to recover or retry.

Thanks in advance for any kind of help.
Rds,
Muzzi


Offline Kirk Baker

  • Senior Software Engineer
  • Camera Bits Staff
  • Superhero Member
  • *****
  • Posts: 21444
    • View Profile
    • Camera Bits, Inc.
Re: Fail to burn cd's and dvd's
« Reply #5 on: September 10, 2009, 07:14:15 PM »
Luiz,

The files are CR2+JPG.
400 photos is taking about 12,8 secs.
I`m using capture time sorting in the contact sheet.

Capture Time sorting is the slowest sort type (besides some of the custom sorts) since it has to parse each file for its EXIF data before the sort can occur.  12.8 seconds (I'll assume that 12,8 means just slightly less than 13 seconds) is perfectly reasonable.  Sort by Filename if you want the fastest response time.

Quote from: Luiz Muzzi
See disc recording log below:
Photo Mechanic: Requested burn speed was 47x, actual burn speed is 4x.
Photo Mechanic: Burn failed, Tue Sep  8 08:31:08 2009
Photo Mechanic: Burn sense: 5/21/02 Illegal Request, Invalid address for write
Photo Mechanic: Burn error: 0x80020022 The device failed to respond properly, unable to recover or retry.

Photo Mechanic uses the OS to burn discs (the DiscRecording.framework to be exact) and those messages are coming from the DiscRecording framework.  It sounds to me like there is something wrong with the OS or your system.  Have you tried restarting the computer?

-Kirk

Offline Luiz Muzzi

  • Hero Member
  • *****
  • Posts: 701
    • View Profile
    • Luiz Muzzi Photography
Re: Fail to burn cd's and dvd's
« Reply #6 on: September 11, 2009, 06:28:38 AM »
Kirk,
I'll set filename sorting as default (unless necessary for renaming,etc).
Yesterday I wiped out Iphoto library, restarted the computer, and PM burned a CD just fine. It could be just a coincidence, but...
Anyway, Thanks a lot for your support.
It is really a great thing to know one can rely on immediate assistance from PM.
I am very satisfied with the system and although I am an amateur photographer I intend to renew my license when the time comes.
Rds,
Muzzi