Author Topic: Nikon D4 and D800 Files don't work in Photo Mechanic [resolved]  (Read 3863 times)

Offline rhomberg

  • Newcomer
  • *
  • Posts: 23
    • View Profile
    • Matthias Rhomberg . fotograf . photographer
Both Nikon D4 and D800 RAW Files can't be rated or tagged, nor can the IPTC Info be edited or anything.

Changes are just ignored without any error. I use .XMP sidecar files. My old D700 NEFs work just fine.

Please look into that, PM just got completely useless for me now since I upgraded my cameras. Thanks!
« Last Edit: June 26, 2012, 12:17:40 PM by rhomberg »

Offline Kirk Baker

  • Senior Software Engineer
  • Camera Bits Staff
  • Superhero Member
  • *****
  • Posts: 24730
    • View Profile
    • Camera Bits, Inc.
Re: Nikon D4 and D800 Files don't work in Photo Mechanic
« Reply #1 on: June 26, 2012, 10:55:18 AM »
It sounds like you have an old version of Photo Mechanic.  What version are you using?

-Kirk

Offline rhomberg

  • Newcomer
  • *
  • Posts: 23
    • View Profile
    • Matthias Rhomberg . fotograf . photographer
Re: Nikon D4 and D800 Files don't work in Photo Mechanic
« Reply #2 on: June 26, 2012, 11:08:05 AM »
I'm using 4.6.9  ;)

Thanks, Matt

Offline Kirk Baker

  • Senior Software Engineer
  • Camera Bits Staff
  • Superhero Member
  • *****
  • Posts: 24730
    • View Profile
    • Camera Bits, Inc.
Re: Nikon D4 and D800 Files don't work in Photo Mechanic
« Reply #3 on: June 26, 2012, 11:30:04 AM »
Matt,

I'm using 4.6.9  ;)

You said you're using XMP sidecar files with your NEFs.  Are they being generated?  Have you checked your IPTC/XMP settings to see if they're still setup the way you want them?

-Kirk

Offline rhomberg

  • Newcomer
  • *
  • Posts: 23
    • View Profile
    • Matthias Rhomberg . fotograf . photographer
Re: Nikon D4 and D800 Files don't work in Photo Mechanic
« Reply #4 on: June 26, 2012, 11:40:37 AM »
Yes Kirk, they are being generated when I ingest the photos. But when I check the Infos, no IPTC infos have been applied during the import either.

I am pretty sure my settings are okay, since freshly imported files from my D700 work just fine. I've sent you some sample files.

Thanks, Matt

Offline Kirk Baker

  • Senior Software Engineer
  • Camera Bits Staff
  • Superhero Member
  • *****
  • Posts: 24730
    • View Profile
    • Camera Bits, Inc.
Re: Nikon D4 and D800 Files don't work in Photo Mechanic
« Reply #5 on: June 26, 2012, 11:43:28 AM »
Matt,

Yes Kirk, they are being generated when I ingest the photos. But when I check the Infos, no IPTC infos have been applied during the import either.

I am pretty sure my settings are okay, since freshly imported files from my D700 work just fine. I've sent you some sample files.

Can you post a screen shot of your IPTC/XMP settings, please?  Use the 'Attachments and other options' link when you're composing your reply to this message and there you'll be able to upload your JPEG format screenshot.

Thanks,

-Kirk

Offline rhomberg

  • Newcomer
  • *
  • Posts: 23
    • View Profile
    • Matthias Rhomberg . fotograf . photographer
Re: Nikon D4 and D800 Files don't work in Photo Mechanic
« Reply #6 on: June 26, 2012, 11:51:48 AM »
Sure, here you go:

[attachment deleted by admin]

Offline rhomberg

  • Newcomer
  • *
  • Posts: 23
    • View Profile
    • Matthias Rhomberg . fotograf . photographer
Re: Nikon D4 and D800 Files don't work in Photo Mechanic
« Reply #7 on: June 26, 2012, 12:16:55 PM »
Damn, I just found the solution myself: I changed the reading order for TIFF-based RAW files to read the sidecar file first, embedded XMP second and embedded IPTC third and now everything works fine again. This is funny because those settings I had before worked just fine for a long, long time.

I guess the D700 did not add embedded XMP or IPTC and now the D800 and D4 do?

Thanks anyways Kirk, Photo Mechanic just got super useful again! ;D


PS: Are my settings okay otherwise?

Offline Kirk Baker

  • Senior Software Engineer
  • Camera Bits Staff
  • Superhero Member
  • *****
  • Posts: 24730
    • View Profile
    • Camera Bits, Inc.
Re: Nikon D4 and D800 Files don't work in Photo Mechanic
« Reply #8 on: June 26, 2012, 01:03:46 PM »
Matt,

Damn, I just found the solution myself: I changed the reading order for TIFF-based RAW files to read the sidecar file first, embedded XMP second and embedded IPTC third and now everything works fine again. This is funny because those settings I had before worked just fine for a long, long time.

I guess the D700 did not add embedded XMP or IPTC and now the D800 and D4 do?

Thanks anyways Kirk, Photo Mechanic just got super useful again! ;D


PS: Are my settings okay otherwise?

They look fine to me.  I generally don't use the IPTC-NAA resources options anymore.  But they don't hurt anything.  You'll get a minor speed increase by turning them off.

-Kirk