Author Topic: Updating contact sheet with adjustments made in Camera RAW  (Read 1637 times)

Offline JasperJuinen

  • Newcomer
  • *
  • Posts: 1
    • View Profile
Updating contact sheet with adjustments made in Camera RAW
« on: October 29, 2012, 09:17:50 AM »
Hi,

I am running Photo Mechanic version 5.0, build 13444 on Windows 7x64 with Camera RAW 6.7.0.339.

After adjusting an image in Camera Raw, opened from Photo Mechanic, and after pressing open image or done, the only update shown on the image in the contact sheet is the crop. Adjustments made to, for example, the exposure or contrast are not updated on the image in the contact sheet. Also, there is no symbol indicating that adjustments have been made to the image.

Can this be changed?

Thanks,

Jasper

 

Offline Kirk Baker

  • Senior Software Engineer
  • Camera Bits Staff
  • Superhero Member
  • *****
  • Posts: 24730
    • View Profile
    • Camera Bits, Inc.
Re: Updating contact sheet with adjustments made in Camera RAW
« Reply #1 on: October 29, 2012, 09:28:41 AM »
Jasper,

I am running Photo Mechanic version 5.0, build 13444 on Windows 7x64 with Camera RAW 6.7.0.339.

After adjusting an image in Camera Raw, opened from Photo Mechanic, and after pressing open image or done, the only update shown on the image in the contact sheet is the crop. Adjustments made to, for example, the exposure or contrast are not updated on the image in the contact sheet. Also, there is no symbol indicating that adjustments have been made to the image.

Can this be changed?

The short answer is: no, that isn't possible.  The longer answer and a full discussion is available here:

http://forums.camerabits.com/index.php?topic=7780.0

-Kirk