Author Topic: Positioning a watermark  (Read 3568 times)

Offline Harvey Levine

  • Member
  • **
  • Posts: 70
    • View Profile
Positioning a watermark
« on: October 19, 2017, 04:54:47 PM »
I need to watermark my sports photos. I have it set to put it in the lower right hand corner. I'd like to move it slightly to the left so it's not so close to the border. How do I do this?

Offline Kirk Baker

  • Senior Software Engineer
  • Camera Bits Staff
  • Superhero Member
  • *****
  • Posts: 25020
    • View Profile
    • Camera Bits, Inc.
Re: Positioning a watermark
« Reply #1 on: October 19, 2017, 05:39:57 PM »
Without seeing your settings it's hard to say what you'd need to do to get what you're after.  It looks like you're using the "Draw near outer edges" option which will tend to put your watermark near edges/corners.  You could uncheck that option.  If that puts your watermark too far from the edge, you could turn that option back on and modify your watermark image and add some transparent padding to fine tune its position.

http://wiki.camerabits.com/en/index.php/User_Manual_Flat_View#Watermarking

HTH,

-Kirk

Offline Harvey Levine

  • Member
  • **
  • Posts: 70
    • View Profile
Re: Positioning a watermark
« Reply #2 on: October 19, 2017, 07:45:53 PM »
Thanks Kirk. i fixed it by enlarging the canvas. Thanks again